Serving the Louisville area  ·  (502) 586-7861  ·  Open Mon-Sun 7am-7pm
📞 (502) 586-7861 Free Quote

Metal Roofing in Shively, KY (40216) · Local Professionals

Louisville Metal Roofing · Fast response in Shively and the Louisville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Shively is a tight-knit, working-class city on the southwest edge of Louisville, and its streets are lined with 1950s brick ranches and cottages that have seen a lot of weather. Many of those homes still carry their original or second-layer shingle roofs, and with the Ohio River corridor just minutes away, humidity and storms take a toll. If you live near Shively Park or along Crums Lane, you know exactly what we mean.

Homeowners in Shively (40216) call Louisville Metal Roofing because we understand the specific challenges of these older homes: narrow lots, mature trees, and roofs that have been patched one too many times. We offer honest assessments and metal roofing solutions that last, whether you are near Millers Lane or off Dixie Highway.

Metal Roofing in Shively (40216)

Shively's housing stock is mostly 1950s to 1970s brick ranches and split-levels, often with low-slope porch roofs and shallow main roof pitches. The lots are typically 50 to 60 feet wide, with mature oaks and maples that drop leaves and limbs, and the soil is the heavy clay common to Jefferson County, which means drainage can be poor and gutters need to be sized correctly. Many homes have had multiple shingle layers, and some have settled or uneven roof decks that require careful inspection before any metal install. We also see a lot of carports and detached garages with exposed-fastener panels that need re-fastening or replacement.

Our team has worked on dozens of roofs in Shively and the surrounding areas, from simple re-roofs to full standing seam installations. We know how to navigate the tight access on streets like Ralph Avenue and the need to protect landscaping and fencing during tear-off.

Our services in Shively

How a Job Works in Shively

Step 1: You call us at (502) 586-7861 or request a free estimate online. We schedule an on-site assessment at your convenience, typically within a few days. We inspect your existing roof, attic, and flashing, and we discuss your goals and budget. You get a written estimate with clear options.

Step 2: Once you approve, we pull the required permits with the City of Shively or Jefferson County (we verify the correct jurisdiction for your address). We order materials and schedule your install, usually 1 to 2 weeks out. On install day, our crew arrives early, protects your landscaping with tarps, and works efficiently. For homes with narrow driveways or tight side yards, we use smaller equipment and hand-carry materials to avoid damage. We also coordinate with any HOA if you have one.

Step 3: After the roof is on, we do a thorough cleanup, including magnet sweeping for nails. We walk the job with you, show you the completed work, and make sure you are satisfied. We do not leave until your property is clean and you have all warranty information in hand.

Pricing for metal roofing in Shively depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical 1,200 to 1,500 square foot ranch, a metal roof replacement with corrugated or ribbed panels starts around $5.50 per square foot, while standing seam runs from $10 per square foot. If your roof has multiple layers of shingles, we may need to tear off and dispose of them, which adds cost. Coating an existing metal roof starts at $2.50 per square foot and can extend its life. Repairs for leaks or loose panels start at $450. We always provide a free estimate with a detailed breakdown, so call (502) 586-7861 to get started.

My 1950s ranch in Shively has two layers of shingles and some sagging. Can you install metal over that?
We need to inspect the decking first. If the sagging is minor and the deck is sound, we can often install a metal roof over the existing shingles using a retrofit system, which saves on tear-off costs. However, if there is significant settling or rot, we will recommend a full tear-off and deck repair before installing metal. We will give you an honest assessment during your free estimate.
A storm just blew some panels loose on my carport near Dixie Highway. How fast can you get here?
We prioritize storm damage calls. In most cases, we can inspect within 24 to 48 hours, and if there is an active leak, we can perform temporary repairs to prevent further damage. Call us at (502) 586-7861 and we will schedule a prompt visit.
What is the typical cost to replace a shingle roof with metal on a 1,300 square foot home in Shively?
For a basic corrugated or ribbed metal roof, you can expect to pay between $7,000 and $10,000 for a 1,300 square foot ranch, including materials and labor. Standing seam will run higher, from $13,000 to $16,000. These are ballpark figures; the actual cost depends on roof pitch, number of penetrations, and whether tear-off is needed. We provide a free detailed estimate.
Do I need a permit to replace my roof in Shively, and what about historic district rules?
Yes, roofing permits are generally required for a full replacement in Shively. The City of Shively and Jefferson County have specific requirements, and we handle the permitting process for you. If your home is in a historic district (which is rare in Shively but possible), there may be design review, and we can help with that as well. We always verify the rules with the local building department before starting.
My neighbor's tree branches hang over my roof. Can you trim them, and what if the neighbor objects?
We do not trim trees, but we can recommend a tree service. If branches are causing damage or dropping debris on your roof, you have the right to trim branches that overhang your property line in Kentucky, but it is best to talk to your neighbor first. If you are in an HOA, check the rules. We can also install leaf guards on your gutters to reduce debris.
Are you fully insured for work on my Shively home?
Yes, we are fully insured with both general liability and workers' compensation coverage. You can have peace of mind knowing that our team is protected and your property is covered.
What maintenance does a metal roof need in Shively's climate, and when should I schedule it?
Metal roofs are low maintenance, but in Shively's humid summers and freeze-thaw winters, we recommend an annual inspection in the fall to check for loose fasteners, debris in gutters, and sealant condition. Also, after any major storm, have us check for damage. We offer free inspections and can perform minor maintenance like tightening screws and cleaning gutters.
Why choose us?

Trusted professionals in Louisville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Louisville

All your work handled by qualified professionals in Louisville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Louisville

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Louisville · Response within 24h · No commitment · ☎ (502) 586-7861

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Louisville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm