Serving the Louisville area  ·  (502) 586-7861  ·  Open Mon-Sun 7am-7pm
📞 (502) 586-7861 Free Quote

Metal Roofing in Shepherdsville, KY (40165) · Local Professionals

Louisville Metal Roofing · Fast response in Shepherdsville and the Louisville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Shepherdsville sits right on the Salt River, and if you drive through town you'll see the mix we deal with every day: older shingle roofs on the brick ranches near Main Street, metal outbuildings and barns on the larger lots off Highway 44, and a lot of homes that have been here since the 1970s and 80s. The weather here is hard on roofs, from summer algae to spring hail, and that's where we come in.

Homeowners in 40165 call Louisville Metal Roofing because we know the difference between a quick patch on a shed and a full replacement on a house that's seen three decades of Kentucky storms. Whether you're near the Salt River or out toward Brooks, we've worked on the same kinds of roofs you see in your neighborhood.

Metal Roofing in Shepherdsville (40165)

Shepherdsville is a mix of older residential streets and rural properties, and that means we see two very different kinds of metal roofing work. In town, lots are tighter, and many homes have mature trees that drop limbs and shade the roof enough to grow moss. Out on the larger parcels, you've got barns, workshops, and detached garages with exposed-fastener metal that takes a beating from wind and sun. The ground here is generally flat to gently rolling, but drainage matters, especially near the Salt River and the creeks that feed it. We pay attention to how water runs off your roof and where it goes, because a metal roof that dumps water against a foundation is a problem waiting to happen.

Our team has been serving Shepherdsville and the surrounding Louisville area long enough to know the local building stock. We've replaced shingle roofs with standing seam on 1970s ranches, repaired R-panel on outbuildings, and installed stone-coated steel on homes that wanted a shake look without the maintenance. We know what works here and what doesn't.

Our services in Shepherdsville

How a Job Works in Shepherdsville

Step 1: You call us at (502) 586-7861 or request a free estimate online. We'll set up a time to come out and look at your roof, whether it's a small repair or a full replacement. We'll check the condition of the existing roof, look at the flashing and fasteners, and talk with you about what you're trying to achieve. You'll get a written estimate before any work starts.

Step 2: Once you approve the estimate, we schedule the work. In Shepherdsville, that might mean coordinating with the Bullitt County building department for permits if a full replacement is needed, or working around tight driveway access in some of the older neighborhoods. We'll also help you understand any HOA requirements if you live in one of the newer subdivisions. Our crew arrives on time, protects your landscaping, and keeps the job site as clean as possible while we work.

Step 3: When we're done, we walk the property with you to make sure you're satisfied. We clean up every nail and scrap, and we haul away the old roofing materials. We don't consider the job finished until you're happy with the result.

Pricing for metal roofing in Shepherdsville depends on the size of your roof, its pitch and complexity, the condition of the existing roof, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer free inspections and estimates for storm damage. Call us at (502) 586-7861 to get a precise number for your home.

My house is near the Salt River and the roof gets a lot of shade and moisture. Is metal roofing a good choice for that environment?
Yes, metal roofing can be a great choice for shaded, moist areas because it doesn't absorb water like shingles and resists moss and algae better. However, we recommend a standing seam or a coated metal product with a factory finish that resists corrosion. We'll also make sure the roof has proper ventilation and that water is directed away from the foundation, which is especially important near the river.
A storm just blew through Shepherdsville and I think I have wind damage on my metal roof. What should I do?
First, stay safe and don't get on the roof yourself. Call us at (502) 586-7861 for a free storm damage inspection. We'll come out, assess the damage, and give you a written estimate for repairs. If it's an emergency leak, we'll do what we can to stop the water from coming in right away.
What's the typical cost to replace a shingle roof with metal on a 1,500 square foot ranch in Shepherdsville?
For a 1,500 square foot ranch, a basic exposed-fastener metal roof might start around $8,000 to $12,000, while a standing seam roof could run $15,000 to $22,000, depending on the pitch, complexity, and whether we need to remove the old shingles. These are ballpark figures. Call us at (502) 586-7861 for a free estimate tailored to your home.
Do I need a permit to replace my roof in Shepherdsville?
In most cases, yes, a permit is required for a full roof replacement in Shepherdsville and Bullitt County. The exact requirements and fees can vary, so we always recommend checking with the Bullitt County building department. As part of our service, we can help you understand the permit process and often handle the paperwork for you.
My neighbor's tree branches hang over my roof. Can I trim them, and does my HOA have rules about metal roof color?
You generally have the right to trim branches that overhang your property line, but it's best to talk with your neighbor first. As for HOA rules, many subdivisions in Shepherdsville have design guidelines that may restrict roof color or material. We can provide samples and documentation to help you get approval from your HOA before we start the job.
Are you insured for roofing work in Shepherdsville?
Yes, we are fully insured with general liability and workers' compensation coverage.
What kind of maintenance does a metal roof need in Shepherdsville's climate?
Metal roofs are low maintenance, but in Shepherdsville's humid summers and freeze-thaw winters, we recommend an annual inspection to check for loose fasteners, debris buildup, and any signs of sealant wear. Keeping gutters clean and trimming overhanging branches will also help extend the life of your roof. We offer maintenance plans and free inspections to help you stay ahead of problems.
Why choose us?

Trusted professionals in Louisville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Louisville

All your work handled by qualified professionals in Louisville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Louisville

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Louisville · Response within 24h · No commitment · ☎ (502) 586-7861

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Louisville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm