Serving the Louisville area  ·  (502) 586-7861  ·  Open Mon-Sun 7am-7pm
📞 (502) 586-7861 Free Quote

Metal Roofing in Hillview, KY (40229) · Local Professionals

Louisville Metal Roofing · Fast response in Hillview and the Louisville area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (502) 586-7861
+238Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Hillview sits just south of Louisville along the I-65 corridor, where 1990s subdivisions and newer builds take the full brunt of open storm wind coming across the Bluegrass. If you live off Blue Lick Road or near Hillview City Park, you already know how fast a spring squall can peel back a shingle or rattle a loose fastener.

That is why homeowners in 40229 call Louisville Metal Roofing. We know the housing stock here, from the brick ranches to the newer two-story homes with architectural shingles, and we know what straight-line winds do to them. One call to (502) 586-7861 gets a free inspection and a straight answer.

Metal Roofing in Hillview (40229)

Hillview is not downtown Louisville. The lots are wider, the grade rolls more, and many homes sit on slabs or crawlspaces with little shade from the prevailing southwest wind. That exposure is great for a metal roof and hard on everything else. We see wind-lifted panels after a storm, failed fasteners on older outbuildings, and flashing gaps where a chimney meets a low-slope porch roof. The soil here holds water after heavy rain, so gutter sizing and downspout placement matter as much as the panels themselves. Access is usually easy on these lots, which keeps installation efficient, but we still plan for tight side yards and fence lines when we stage materials.

Our team has worked metal roofs across Jefferson County and the surrounding counties, from 5V crimp on older porches to standing seam in charcoal and bronze on newer homes. In Hillview, the typical call is a roof inspection after a wind event or a full metal roof installation on a 1990s subdivision home that is ready for its second roof.

Our services in Hillview

How a Job Works in Hillview

Step 1: You call (502) 586-7861 or request a free estimate. We schedule an on-site assessment, walk the roof and the attic if accessible, check fasteners, seams, flashing, and gutters, and give you a written scope with pricing. No pressure and no vague numbers.

Step 2: Once you approve, we pull the required roofing permit with the local building department and schedule the work. On Hillview lots, we plan delivery and dumpster placement around driveways and fence lines, and we coordinate with any HOA design review before ordering panels. Installation typically runs one to three days depending on roof size and profile.

Step 3: We clean the yard with a magnet sweep for nails and screws, haul away old material, and walk the finished roof with you. You get a final walkthrough, warranty paperwork, and our direct number for any follow-up.

Pricing in Hillview depends on roof size, pitch, access, and the condition of the decking and flashing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. The biggest cost factors are square footage, how many penetrations and valleys the roof has, whether the old roof needs to come off, and how urgent the work is after a storm. Call (502) 586-7861 for a free estimate with real numbers for your Hillview home.

My 1990s subdivision home near Hillview City Park has original shingles and I keep finding granules in the gutters. Is a metal roof over shingles a good option here?
Often yes, if your existing shingle layer is in decent shape and your local building department allows the added weight and layer count. A retrofit saves tear-off time and landfill cost, and it works well on the simple gable roofs common in Hillview subdivisions. We inspect the deck and flashing first, because a metal roof is only as good as what is under it.
A storm just peeled back panels on my barn off Blue Lick Road. How fast can you get out to Hillview?
We prioritize active leaks and wind damage. Call (502) 586-7861 and we will schedule the earliest available inspection, often same or next day depending on storm volume. We can tarp or secure the area to limit further water intrusion while we prepare a repair scope.
What does a typical metal roof repair cost in Hillview compared to a full replacement?
Most repairs start at $450, and screw replacement or re-fastening starts at $750. A full replacement starts around $9 per square foot. The deciding factor is usually the age and condition of the roof and whether the leak is isolated to flashing or a few fasteners. We give you both numbers so you can decide.
Do I need a permit for a metal roof in Hillview, and does the city have any design rules?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary. We confirm the rules with the local building department before work starts. If your home is in an HOA or a design-reviewed area, check panel profile and color approval early, because that can affect lead time.
My neighbor's tree limbs hang over my roof line. Who is responsible if a limb damages my metal roof?
In general, you are responsible for what falls on your property, and your neighbor is responsible for maintaining trees on theirs. If a limb from a neighbor's tree punctures your roof, document it with photos and call your insurer. We can inspect and repair the damage and provide documentation. For HOA questions about tree maintenance, start with your HOA board.
Does your team carry insurance coverage for work on my Hillview property?
Yes. We are fully insured with general liability and workers' compensation coverage.
What maintenance should I do on a metal roof in Hillview before storm season?
Check fasteners and seams each spring, clear gutters and downspouts of debris from the oaks and maples common here, and look for lifted panels or flashing gaps after any wind event. A free inspection before storm season catches small issues before they become leaks. Call (502) 586-7861 to schedule one.

Nearby service areas

📍 Louisville 40218📍 Jeffersontown 40220📍 Shively 40216📍 St. Matthews 40207
Why choose us?

Trusted professionals in Louisville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Louisville

All your work handled by qualified professionals in Louisville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

238+ Verified Client Reviews in Louisville

⭐⭐⭐⭐⭐ 4.9/5 · 238 verified Google reviews

Amanda K.
⭐⭐⭐⭐⭐
AK
Amanda K.
Jeffersontown

“Had them put a metal roof on our hangar out at the airfield and it turned out rock solid. Crew of four knocked it out in about three days and cleaned up every last screw and scrap piece before they left. Way better than the old rusted panels we had.”

Commercial Metal Roofing
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Anchorage

“We wanted a real copper awning over the front porch and Louisville Metal Roofing delivered. The seams are beautiful and the patina is already starting to look amazing. Worth every penny.”

Copper & Specialty Metal Roofing
David L.
⭐⭐⭐⭐⭐
DL
David L.
Prospect

“They re-roofed our barn and the attached equipment shed, and I couldn't be happier. With hay stored inside, I was worried about leaks, but they sealed everything up tight and even added snow guards. Honest folks who know farm buildings.”

Agricultural Metal Roofing
Jennifer M.
⭐⭐⭐⭐
JM
Jennifer M.
St. Matthews

“Put a new standing seam roof on our brick house and it looks fantastic against the brick. Only gripe is they had to come back a second time to finish the trim, but they were upfront about it and didn't charge extra. Overall really pleased.”

Metal Roof Installation
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Lyndon

“I had them out to deal with a mounting issue on my metal roof and they re-fastened everything and checked all the flashing while they were up there. Quick, fair price, and no more rattling in the wind. Grateful they didn't try to sell me a whole new roof.”

Metal Roof Repair
Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
Shively

“Replaced our old shingle roof with metal and the difference is night and day. The crew was in and out in two days, and you honestly couldn't tell they'd been here except for the gorgeous new roof. Our AC even runs less now.”

Metal Roof Replacement
James P.
⭐⭐⭐⭐⭐
JP
James P.
Middletown

“We went with stone-coated steel to keep the Tudor look of our house and I was nervous about how it would turn out. It matches the style perfectly and looks like it's always been there. The installers clearly took pride in the detail work around the gables.”

Stone-Coated Steel Roofing
Lisa H.
⭐⭐⭐⭐
LH
Lisa H.
Louisville

“Did a metal roof over our existing shingles on the brick house and saved us a ton of hassle and mess. Took about two days, and they hauled away all the old vents and junk. Small thing, a couple of nails turned up in the driveway afterward, but they came right back to sweep when I called. Happy overall.”

Metal Roof Over Shingles (Retrofit)
Free Quote

Get Your Free Quote

Metal Roofing in Louisville · Response within 24h · No commitment · ☎ (502) 586-7861

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Louisville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm